NUVALOY Pipe

PRINT

NUVALOY® pipe is specifically designed for all abrasive ash handling applications.  NUVALOY is available in two grades; NUVALOY  is an alloyed, centrifugally cast ductile iron pipe available in NUVALOY I (285-340 BHN) or NUVALOY II (475-550 BHN).

 

  • Chrome-Iron alloy for improved abrasion resistance
  • NUVALOY I 285 -340 BHN standard for most applications
  • NUVALOY II 475-550 BHN for enhanced wear life
  • Plain End Pipe for easy installation
  • Centrifugally cast for uniform wall thickness and mass density
  • Pipe range from 4" to 14" ID
  • Abrasion resistant for a variety of ash handling applications
  • Customer has the ability to order standard or custom lengths

 

  1. How wear resistant is NUVALOY? [+]

    NUVALOY has 3 times the wear resistance of mild steels.

     

  2. What is the impact strength of NUVALOY? [+]

    NUVALOY has an impact strength of 3 to 1 over gray cast iron.

     

  3. What are the physical properties of NUVALOY? [+]

    NUVALOY is an alloy with a 20% iron and 80% nickel content.

     

  4. Can you field cut NUVALOY pipe? [+]

    Yes, NUVALOY can be cut in the field when following UCC standard guidelines.  Please contact your local UCC Sales Representative for further information.

     

  5. What is the standard length of NUVALOY Pipe? [+]
    The standard length of  NUVALOY Pipe is 18 feet.
NUVA FEEDER Dilute Phase Pressure System

The NUVA FEEDER® pressure system is optimal where conveying capacity requirements exceed the limits of a vacuum system. 

MultiDAC Dense Phase Pressure System

The MultiDAC™ system is intended primarily for short conveying distances.  Learn more about our MultiDAC Pressure System.

 

DEPAC Dense Phase Pressure System

DEPAC® is a dense phase system for conveying large quantity of material at low velocity over very long distances. 

 

Vacuum Systems

The NUVEYOR® Vacuum System is an industry standard for efficient, reliable ash removal and is capable of conveying up to 80 TPH and distances of 1500 ft (450m).

Vacuum-Pressure Transfer System

UCC's Vacuum/Pressure Transfer systems combine the simplicity and lower headroom requirements of a vacuum system under the hoppers with the high capacity and long distance conveying capability of a positive pressure system.

Recirculation

Ideal for converting wet sluice systems into a “dry” ash system without change to the existing bottom ash hoppers.

 

Pneumatic Systems

UCC pioneered the first dry bottom ash system using pneumatic technology in 1920. The PAX Pneumatic Ash Extractor added new technology to this time-proven vacuum system design and offers many benefits over wet bottom ash systems.

Lime Handling

Lime Handling systems for wet scrubbers, dry scrubbers and fluidized bed boiler (FBB) applications.